- Covering Instead of Replacing Shingles
- Reusing Flashing
- Ineffective Moisture Protection
- Improper Overhang
- Improper Ventilation
- Decking Issues
Above you everyday, the roof is an integral piece to your home. Not only is it among the more visible aspects of your house, it also serves to keep you protected from all the elements. When you have a roof that’s in good condition, your home will stay cool during summer, warm throughout winter, and also dry during rain.
In contrast, having a roof in poor condition could lead to a myriad of annoyances; exposure to elements, costly repairs, and the ridicule of your neighbors. This is why it’s important that you get some qualified roofers on speed dial so that they can repair any damage ASAP.
However, you need to pick a qualified roofer who’s qualified for the job. Regardless of whether you hire a roofer or decide to handle things yourself, there are some things that you should keep a lookout for. Without further adieu, here are roofing mistakes you must avoid.
Covering Instead of Replacing Shingles
A common cost cutting method is to avoid replacing shingles by simply covering over them with new ones. Most low-end roofing companies use this trick to shorten their turnaround time and lower costs on their end. The right method is to get rid of every last old shingle and get brand new ones as replacements.
This is even truer when the existing shingles are damaged. Stacking new roof shingles on old ones creates a space in between the two layers where dirt builds up.
This will lead to an increased rate of failure and higher repair frequency than if it was just done the right way. Whether you handle the job yourself or hire a contractor, always ensure that all existing roofing materials were removed prior to the installation of the new roof.
The thin sheets of metallic flashing on a roof serves to prevent the entry of moisture into a house through places like skylights, roof valleys, and chimneys. When a roof is being replaced, some roofing companies try to lower costs by reusing the existing flashing.
Sure, the old roof flashing might still look good, but reusing it will likely cause more issues later on. If you’re handling the project yourself, be sure to replace the flashing with a brand new one. However, if you decide to let a contractor take on the task for you, be sure to inform them that you want new flashings.
Ineffective Moisture Protection
While shingles do an outstanding job of redirecting the water on your roof, it’s paramount that you have adequate moisture protection lying beneath. This barrier doesn’t just protect you from rain, it also protects from ice and snow. If your roof stands any chance against moisture, you’ll need a high-end barrier.
While overhangs do give houses a nice look, it’s important that any shingles completely overhang the eaves. Because if your roofing materials aren’t going past the eaves, you’ll end up with wind damage to your shingles.
Ensure that you or your contractor of choice places sufficient overhang to keep everything sturdy. Also, check that your contractor is using enough fasteners for each shingle in accordance with the wind speeds that your area gets.
While in the process of planning repairs and renovations, most homeowners forget to think about the importance of ventilation.
High-end roofing companies use modern materials to keep your roof structurally capable and adequately vented. If a roof suffers from improper ventilation, it could lead to moisture collection and heat buildup — in turn leading to frequent and costly repairs.
The stable foundation for roof shingles is the the decking of your roof. This is why it’s a crucial component of a house. You need to ensure that the decking is in good shape and is installed properly.
Whether your roof got damaged by a recent calamity or is just worn after decades of use, it’s important to steer clear of the mistakes that we’ve listed above.
While some of the corners you cut might seem to save you money, the amount that you’ll spend in maintenance and repair down the line will eat up whatever cash you saved as well as anything else you have in your bank account. If you do the job yourself, do it right, and if you hire a contractor to handle the project, choose one with a good reputation.
Local companies are more likely to provide quality service and cater to your every request. Hiring companies from other cities that pop in whenever a natural disaster occurs could screw you over down the line. How are you supposed to cash in on your warranty if the company providing it is all the way across the country?